Customer Reviews For The First Alert Wireless Interconnected Hardwired Smoke Alarm - SA521CN-3ST
Devices arrived promptly and in good order the day after they were ordered. Installation was easy using the web site and the included instructions. Thanks First Alert.
They work great easy set up only downside is that they are bulky seem huge
The product was put into operation this past weekend. The system puts together two separate buildings into one . A quick sinking with the help of a technician , was a breeze. Thank You ! Frank MCQUADE. a combo, a Smoke & CO system would be great
Works as advertised. Shipped as promised.
This item did what was expected. It allowed us to connect all of our wireless smoke and carbon monoxide detectors together.
Tested good. Synced to other smoke alarm.
It was easy to install since we had older BRK / First Alert units. Connected with the other units flawlessly.
This product installation is quick and easy. The set up is very labor efficient. This product is loud and will notify you immediately. This is a very good system and needs to be put out to people to let those know about it without alarm systems. Pricing is very reasonable.
I had old smoke alarms that I wanted to replace: 2 upstairs, 1 main floor and 1 in the basement. Three I replaced with combo smoke/CO2, the 2nd upstairs unit I purchased a bridge unit to connect the old hard wired to the 4 new battery units. The hardest part was the wired units because the old connectors didn't match any brand of new unit. The detectors came with easy directions and it wasn't that hard. Once set up, all work perfectly together. I like the voice indication, telling you where the fire or co2 issue is located. I am very pleased with the purchase and feel more comfortable with my expanded zone. No extra cost for wiring so although the units are a little more expensive it doesn't cost as much as an electrician!
Hardwired systems seamlessly integrated with the multiple First Alert wireless smoke alarms we installed. Now all alarms are integrated throughout our home. Awesome!
Great product. We integrated with 8 other Wireless Smoke Alarms. All linked perfectly together as advertised and we now have comfort of knowing any alarm activation will set off alarms throughout the house.
For some reason it was hard to link this one. I have used them before and never had a problem till now. It worked in the end
The quality of this product is very good and responds to my needs.
It was very simple to sync all the smoke alarms in our home. Now we are comforted knowing that if a fire starts in the basement, we will know about it instantly 2 floors above in our bedroom.
I spoke with someone in technical support on a Sunday who was extremely helpful in advising me which products to buy to make my house compliant for a house sale. I ordered 5 products. They all arrived on time and in good shape. They were very easy to install and all worked immediately.
Always Works perfect
Works perfect
I have purchased many of these and they always work. Easy to program.
This product was very easy to Install and works great.
I really like the product!!
Other reasons include: It could be a different device or appliance such as a security system, monitor, carbon monoxide alarm, or other device which has a similar low battery or alert signal. Some of the same factors that cause unwanted alarms can cause intermittent alarms: dust and insects in the alarm or power interruptions in hardwired alarms. Improper wiring on AC or AC/DC smoke alarms. AC alarms will chirp every 5 seconds if the interconnect wire is grounded. The orange interconnect wire should NEVER be grounded; it should only be used to interconnect other smoke alarms or compatible devices.
- You may not be holding the test button down long enough. Try holding it down for up to 10 seconds (20 seconds on photoelectric models) .
- Your battery may not be installed properly or snapped all the way in place. Even if the alarm sounded briefly when the battery touched the terminals, you still need to make sure it is snapped securely in place. If the battery is loose, in cannot power the smoke alarm properly. After installing new batteries, be sure to test your smoke detector.
- Your AC power may not be on. AC and AC/DC units will have a power indicator light (red or green) that shines continuously when they are receiving electrical power.
- If you have a 10-Year model, the smoke alarm may not have been properly activated. If the tab broke away before the alarm was activated, you can use a toothpick to move the switch over to test the alarm.
- There may be insufficient battery power, try new batteries.
- Problems with voltage or insufficient electrical power (brown out) may cause a continuous weak sounding alarm. For AC or AC/DC models, temporarily disconnect power at the service panel until the brown out is over. If you do not restore the AC power, your smoke alarms cannot warn you of a fire.
- Incompatible warning device. If an incompatible alarm or auxiliary device is linked into a series of AC or AC/DC smoke alarms it may cause the system inadvertently go off.
- It is possible that your smoke alarm "silence" button was pushed by mistake. The alarm will now "chirp" once a minute for up to 15 minutes before resetting.
- Are you sure it's the smoke alarm? Funny to ask, but other devices have similar low battery chirps or warning tones.
- Your "new" batteries may not be fresh. If batteries are stored, especially in cold areas like refrigerators, they lose their charge more quickly. Always check the freshness date on the package when buying new batteries. Keep plenty of replacement batteries on hand so that you are sure to always be protected by your smoke alarms.
If it's time to replace your alarms, consider the NEW 10-Year Life series and never have to worry about a battery replacement for the life of the alarm.10-Year alarms are available in smoke, carbon monoxide and combination alarms.
Wireless Interconnect Hardwired Smoke Alarm
The First Alert SA521CN-3ST Interconnected Smoke Alarm allows owners to create an interconnected fire alarm system without the cost and hassle of wiring. Use this smoke detector to replace an existing hardwired smoke alarm and then install additional First Alert Wireless alarms for an interconnected safety network (additional alarms sold separately). This hardwired smoke detector can connect and communicate with up to 18 compatible alarms, so when one alarm is triggered, the entire system reacts. An integrated battery backup ensures the smoke alarm continues to work even during power outages.
Photoelectric Sensor Warns of Smoldering Fires
The First Alert Wireless Interconnect Smoke Alarm comes equipped with a photoelectric sensor to provide the earliest possible warning of fire. The sensor is optimized to detect larger smoke particles produced by smoldering fires, such as those caused by unextinguished cigarettes. It also distinguishes between real threats and smoke/vapor produced during showering, cooking, and other everyday activities, helping minimize the number of false alarms. A patented smoke entry system helps ensures reliable detection by providing a direct air pathway to the sensor.
Interconnectivity for Larger Areas
The hardwired smoke alarm can be connected to other compatible BRK and First Alert hardwired alarms for larger buildings such as dormitories, office buildings, and apartments. Connect up to 18 compatible devices: up to 12 smoke alarms and 6 compatible devices like horns and repeaters. The communication distance (range) between any two First Alert Wireless Interconnect Alarms is typically 50 ft. (15 meters) inside of a home. Some features of a home, such as the number of floors, number/size of rooms, furniture and types of building materials used may reduce the range of wireless interconnect alarms. First Alert helps you create a comprehensive warning system for you and your property.
Battery Backup for Continuous Coverage
In the event of a power outage, the smoke alarm is still able to function thanks to its two AA backup batteries. An indicator sound is emitted when the batteries need to be replaced. The inclusion of an optional drawer and mounting bracket lock will discourage tampering.
Test and Silence Button
Mute Button has been included to serve the dual purpose of silencing nuisance alarms and testing the functionality of your alarm.
EZ-Access Battery Door
The addition of an EZ Access Battery Door removes the hassles and burdens associated with changing your alarm's batteries.
First Alert Wireless Interconnect Hardwired Smoke Alarm SA521CN-3ST
